Filter
Top Products
3. When one indicator light comes on
but another goes off, this tells you
the second selection has canceled
the first.
NOTE: The REG HEAVY Indicator
Light goes off when the PERM’T
PRESS Indicator Light comes on.
4. For best fabric care and washability,
maximum and minimum wash times
are preprogrammed for each cycle.
The washer will not accept less time
than the minimum wash time or more
time than the maximum wash time.
(See pages 11 and 12 for detailed
times.)
Restarting your washer
The washer is designed to remember
where it was in the cycle when the
HOLD/RESTART Pad is touched. It will
not remember if there is a power inter-
ruption, such as a blown fuse.
If power is lost at beginning of
wash cycle:
1. Touch Power ON.
2. Touch Fabric Selection and options.
The washer will finish filling (if
needed), and wash according to the
new selections.
If power is lost with water
remaining in the washer:
1. Touch Power ON.
2. Touch SPIN to drain and spin the
load.
3. After the washer stops, touch Power
ON again.
4. Touch Fabric Selection and options.
The washer will wash according to
the new selections.
If memory is lost at beginning of
rinse cycle:
1. Touch Power ON.
2. Touch RINSE SPIN to finish filling
and/or the rinsing cycle.
7