Filter
Top Products
. ,
0
TEMP OPTIONS RINSE OPTIONS
p BEEP
For more selection time:
l
Touch HOLD/RESTART pad at any
step you want more time to decide on
another selection.
l
HOLD/RESTART will stop the washer
for up to 15 minutes.
l
To restart the washer, touch the blink-
ing HOLD/RESTART pad.
To change a selection:
l
All options, except Fabric Selections,
can be changed any time before they
have started.
l
Fabric Selections may only be
changed up to the start of the first fill.
l
If the washer has completed the first
fill, touch Power OFF, then start over
with step 1.
l
The indicator light will stay on and one
beep will sound when a selection has
been accepted.
To change wash or rinse
temperatures
The washer is programmed to provide a
warm wash and cold rinse in every
selection. If another wash or rinse tem-
perature is wanted, touch the pad that
corresponds to that temperature.
NOTE: To save energy and receive the
most wrinkle-free results, use a cold
rinse for all fabrics.
l
To protect some fabrics, the washer
will not accept the following selections:
HOT WASH Option cannot be
accepted with:
- KNITS GENTLE Fabric Selection.
-
any Pre-Wash Options.
WARM RINSE Option cannot be
accepted with PERM’T PRESS
Fabric Selection.
l
If the selection has been accepted,
the indicator light will stay on and 1
beep will sound.
l
If the selection has not been
accepted, the indicator light will not
stay on and 3 beeps will sound.
l
A Fabric Selection must be selected
before HOT or COLD WASH Options
can be selected.
5