Filter
Top Products
3. Select agitation and spin speeds
l
Turn the knob to point at the wash
cycle speeds you want for your wash
load.
. The top speed is the agitation
selection and the bottom speed is
the spin selection. See page 6 for
tips on selecting speeds.
4. Select cycle and wash time
Start the washer
. Push in the Cycle Control Knob and
turn it clockwise.
. Stop when the indicator on the
knob’s outer ring points to the
number in the wash cycle you want.
The numbers are minutes of wash
time.
9 Start the washer by pulling out the
Cycle Control Knob. The washer will
fill to the selected water level with
the selected wash water tempera-
ture. The washer will begin agitating
immediately after filling. Agitation
can occur with the washer lid up or
down.
. To stop the washer at any time, push
in the Cycle Control Knob. To restart
the washer, pull out the Cycle
Control Knob.