Filter
Top Products
Operating Instructions
Starting your washer
Be sure to measure and add deteroent, then place a sorted load in the washer
before starting it.
1. Select a load size
l
Turn the knob to point at a setting that
describes the size of load you want to
wash.
l
The knob can be set anywhere on or
between EX SMALL (a few small
items) and LARGE (a full load).
NOTE: For best washing results, items
should move freely in the washer. Do
not overload the washer or choose a
water level that is too low for your wash
load.
For best results with permanent
press clothes, use the LARGE water
level.
Reduce wash time when using EX
SMALL or SMALL water level settings.
Loads with only a few small items need
less wash time for best results.
2. Select water temperature
9 Match the water temperature to the
type of fabric and soils being washed.
l
The top temperature is the wash
selection and the bottom temperature
is the rinse selection.
NOTE: Use warm wash water with the
PERMANENT PRESS or GENTLE/
SHORT Cycles.
For heavily soiled permanent press
or knit clothes, pre-wash or pre-soak
before washing in warm water.
ALWAYS use cold rinse water for
permanent press fabrics.