Whirlpool LA6800XK Washer/Dryer User Manual


 
loading your
Washer
For best washing results and
energy savings, sort the laundry
carefully.
1. Sort the laundry into loads.
l
Group the laundry into loads that
can be washed and dried together.
See the Laundry Guide for informa-
tion and samples of typical loads.
l
Try to mix large and small items for
best movement in the washer.
2. Measure Detergent; Add to
Washer Basket.
l
See detergent information on page
6and in Section IV of the Laundry
Guide.
l
Add dry bleach or water condi-
tioner (not fabric softener] if used.
Follow the package directions
carefully.
3. load the Washer.
l
Spread the load evenly. (Don’t put
all the towels on one side and a few
wash cloths on the other.] An unbal-
anced load can cause the washer to
shake during spinning
l
Load without packing so items can
move freely for best cleaning and
least wrinkling.
4. Pour liquid Bleach into the
Dispenser.
l
See page 6 and the “Laundry
Aids” section of the Laundry Guide for
more information
5. Add Diluted Fabric Softener only
to the Deep Rinse Cycle.
l
DO NOT ADD FABRIC SOFTENER TO
THE WASH. Fabric softeners can com-
bine with soap or detergent to make
greasy stains on fabrics.
Understanding
your Washer
Thus
automatic washer
has cycle
settings with different agitation and shin
speeds for different fabrrc types For
example, the REGULAR HEAVY Cyc!e
has high agltatron and high spin
speeds The PERMANENT PRESS Cycle,
has high agrtatron speeds, but low spin
speeds
The washer has a
LOAD SIZE
SELECTOR
thot lets you adjust the water
level to match the size of the load
It
has a
TEMPERATURE SELECTOR.
You can select the wash and rinse water
temperatures best for the amount of
so11
and fabrrc type in each load
Sections in this Use & Core Guide
go into detail on the “what and why
cf each setting Read this and the Laun
c?i Guide carefully to get the best
cleaning results
MAGIC CLEAN@
Lint Filter
The lint filter IS self-cleaning It
filters water used in both the wash and
the rinse. When the washer drains, lent
collected
IS
flushed away.
If your washer drains Into a tub,
watch the drain strainer for the lint A
linty load can plug the tub dram and
cause an overflow