Filter
Top Products
Starting your washer
Before starting your washer:
I. Measure and add detergent.
2. Place sorted load in washer.
3. Start washer.
Select a
1. LOAD SIZE
Select WATER
2. TEMPERATURES
l
Turn the knob to point at a setting
l
Match the wash water temperature
that describes the size of load you
to the type of fabrics and soils being
want to wash.
washed.
Recommended wash temperatures
can be found in your “Laundry Guide:’
. Set the knob anywhere on or be-
tween EX SMALL (a few items) and
LARGE (a full load).
NOTE: Use the LARGE wafer level
for besf permanent press resulk
,._~
. LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items.
CAUTION:
DO NOT
OVERLOAD WASHER.
*Approximate
fill with load.
LARGE (17.3 gals./655 L)*
MED (13.4 gals./50.8 L)’
EX SMALL (9.5 galsJ36.0 L)’
4