Filter
Top Products
Liquid bleach dispenser
Always measure bleach. Do not
guess. Never use more than 1 cup
(250 ml) for a full load. Use less with
lower water level settings. Follow
directions on bottle for safe use. Use
a cup with a pouring spout to avoid
spilling.
For more information on bleachin
Liquid fabric softener dispc
1. Add detergent and load to the
basket.
2. Add liquid fabric softener to
the dispenser using the amount
recommended on the bottle.
3. Avoid dripping or spilling any fab-
ric softener on the load.
Cleaning the lint filter
Clean filter after every load for best
filtering results. Note: The load type
will vary the amount of lint build-up.
To clean:
l
Lift off the agitator barrel.
l
Wash or wipe the filter clean in the
bottom of the agitator barrel. The
filter is not removable.
l
Replace the agitator barrel and
snap into place.
NOTE: Do not stop the washer
during this tlme. If you do, the
softener will mix with the remaining
soapy wash water. This will cause
stains. Do not put detergent in the
llquld fabric softener dispenser.
6. If dispenser needs cleaning, flush
with hot water. IJ
IOTE: Do not wash
clothes with dlsDenser removed.
1. Load the washer first.
2. Pour measured bleach carefully
into dispenser. DO NOT let bleach
splash, drip or run down into the
washer basket. Undiluted bleach
will damage any fabric it touches.
3. Start the washer. Bleach will be
diluted automatically during the
wash part of the cycle.
g, see “Laundry Guide” page 11.
znser
4. Dilute fabric softener with hot
water. Add enough hot water to fill
the dispenser up to the opening.
5. Start the washer. Diluted liquid fab-
ric softener will be added to the
load during the deep rinse portion
of the cycle.