Filter
Top Products
Operating instructions
Starting Your Washer
Be sure to measure and add detergent, then place
a sorted load In the washer before starling It.
1
2
Select
. Select a LOAD SIZE
.
WATER TEMPERATURES
l Turn the knob to point at a setting
that describes the size of load you
want to wash.
l Set the knob anywhere on or be
tween EX SMALL (a few small items]
and LARGE (a full load).
NOTE: Use the LARGE water level
for best permanent press results.
1
l Match the wash and rinse water
temperature to the type of fabrics
and soils being washed.
l This drawing shows a warm wash
(top temperature] and cold rinse
(bottom temperature) selection.
Recommended wash temperatures
can be found in vour “Laundrv Guide.”
I
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
CAUTION:
DO NOT
OVERLOAD WASHER.
I
tearing of load items.
*Approximate
(17.3 gals./655 L)*
fill with load.
(14.7 gals./557 L)’
(12.1 gals./45.8 L)’
EBSMALL (9.5 galsI36.0 L)’
4