If you need service or assistance,
we suggest you follow these five steps:
1.
Before calling for
assistance.. .
Performance problems often result
from little things you can find and fix
yourself without tools of any kind.
If your washer does not fill:
l Is the power supply cord plugged
into a live circuit with the proper
l Have you checked your home’s
main fuses or circuit breaker box?
l Are the water supply hoses kinked?
l Is the Cycle Control Knob set and
pulled out?
If your washer does not spin:
l Is the lid closes?
0 Is the power supply cord plugged
into a live circuit with the proper
voltage?
l Have you checked your home’s
main fuses or circuit breaker box?
If your washer stops during a cycle:
l Remember, the washer pauses
briefly at different times in each cy-
cle. These pauses are normal.
If your washer fills and dmlns
wlthout runnlng:
l Make sure that the Cycle Control
Knob is pointing to a number in the
cycle.
Make sure fhe drain hose Is higher
than the water level In the washer.
If lt Isnnr:
a The washer may seem to be drain-
Ing during wash and rinse cycles.
l Water can siphon out. (See “lnstalla-
tion Instructions:‘)
l Are both water faucets open?
14