Filter
Top Products
Winterizing
Because some wafer stays in the washer,
freezing can cause a lot of damage. If your
washer is
stored or moved
during the cold
weather...
1. Shut off both water
2. Put a quart of
autoniobile-type
antifreeze in the
basket.
faucets. Disconnect
and drain water inlet
hoses.
3. Set the washer for a
DRAIN and SPIN (see
page 8). Let it run for
about 30 seconds
to mix the antifreeze
and water.
To use the washer again...
1.
Flush water pipes and hoses.
2. Connect hoses to the washer.
3. Turn on the water faucets.
4. Run the water
through a com-
plete cycle with
one cup of deter-
gent to clean out
the antifreeze.
10