Filter
Top Products
To re-use wash water:
1. Set the Cycle Control Knob on
SUDS RETURN. Do not add the
load items at this time.
2. Pull the Cycle Control Knob out.
The washer will pump most of the
wash water from the storage tub
back into the washer basket.
3. When the wash water has pumped
back into the washer, push in the
Cycle Control Knob.
4. Add about i/2 the recommended
amount of detergent.
5. Add the load items.
6. Turn the Cycle Control Knob
clockwise to the desired cycle and
wash time.
7. Pull out the Cycle Control Knob to
start the washer.
8. About 1 inch (2.5 cm) of wash water
will remain in the tub. The water will
contain soils that have settled out.
Drain the storage tub.
NOTE: The end of the suds return
hose has a plastic strainer to prevent
objects from being pulled into the
washer during SUDS RETURN.