Filter
Top Products
Other Operating Instructions
Rinse and spin
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may want an extra rinse
and spin.
1. Push Cycle Control Knob in.
2. Turn clockwise to one of the dots
on the dial, as illustrated.
3. Pull Cycle Control Knob out. The
washer will fill to selected level,
agitate 2 minutes, drain and spin.
Drain and spin
A drain and spin may help shorten
drying times for some heavy fabrics or
special-care items by removing excess
water.
1. Push Cycle Control Knob in.
2. Turn clockwise until indicator points
to the bar just before an OFF area
on the dial, as illustrated.
3. Pull Cycle Control Knob out. The
washer will drain and spin.
Pre-wash Cycle
For best results, use warm water for
pre-washing stained laundry. Hot
water can set stains.
1. Use recommended amount of
presoak product or detergent.
2. Push Cycle control Knob in.
3. Turn clockwise until indicator points
to a number next to PRE-WASH.
4. Pull Cycle Control Knob out. The
washer will start.
5. When the cycle is over, add
detergent for the next selected
wash cycle. The Pre-wash Cycle
should always be followed by a
wash cycle.
NOTE: See the Laundry Guide for
additional pre-washing information.
10