Filter
Top Products
Winterizing
Because some water stays in the washer, freezing
can cause a lot of damage. If your washer is
stored or moved during the cold weather...
1. Shut off both water
2. Put a quart of
faucets. Disconnect
automotive-type
and drain water
antifreeze in the
inlet hoses. basket.
3. Set the washer for a
DRAIN and SPIN (see
page 10). Let it run
for about 30 seconds
to mix the antifreeze
and water.
ON
To use the washer again...
1. Flush water pipes and hoses.
2. Connect hoses to the washer
3. Turn on the water faucets.
4. Run the washer
through a com-
plete cycle with
one cup of deter-
gent to clean out
the antifreeze.
12