Filter
Top Products
Other operating instructions
For a rinse and spin
For a drain and spin
You may need an extra rinse and
Your washer can be set to drain and
spin for heavily soiled loads which
spin out water.
need more detergent. (Extra detergent
1. Push Control Knob in.
can require an extra rinse.]
1. Push Control Knob in.
2. Turn clockwise to any o on the dial.
See above drawing.
3. Pull Control Knob out The washer
will fill to selected level; agitate 2
minutes; drain and spin.
2. Turn clockwise to the bar just before
the OFF area in any cycle. See
above drawing.
3. Pull Control Knob out. The washer
will drain and spin.
Cleaning the lint filter
Clean filter after every load for
best filtering results. NOTE: The load
type will vary the amount of lint
build-up.
To clean:
1. Lift off the agitator barrel.
2. Wash or wipe the filter clean in
the bottom of the agitator barrel.
The filter is not removable.
3. Replace the agitator barrel and
snap into place.
IO