Filter
Top Products
C.
Start the washer by pulling out
the Control Knob. After filling, the
washer will agitate for the selected
number of minutes.
D.
To stop the washer at any time,
push in the Control Knob. To restart
the washer, pull out the Control Knob
3. To select a WATER LEVEL
HIGH LEVEL WATER.The washer WIII
automatically fill to its highest level...
about17.2gallons(65.lL)...whenthe
Control Knob points to a FILL area or
anywhere in the PERMANENT PRESS
Cycle.
Be careful to use enough water
for the load. Too big a load or
too little water can result in
a wash that isn’t clean; some
items can be torn,
LOWER WATER LEVELS. Settrng the
washer to fill with less water also sets
rt for shorter wash ttme
1. Push the Control Knob rn and turn tt
clockwise to a ftll area in the cycle
you want
2. Pull the Control Knob out, the
washer wtll start to fill
3. When there IS as much water as
you want in the washer, push IN the
Control Knob SLOWLY turn the Con-
trol Knob clockwise past the fill area.
Pull out the knob to start the washer
For all rinses, the washer fills to its
highest level with cold water.
DO NOT
OVERLOAD
Overloading or packing can...
l
cause poor cleaning;
l
increase wrinkling;
l
cause excessive lint;
l
wear out or tear items.
DO NOT LOAD
ABOVE CLOTHES GUARD
See pages 6 and 7 in
your “Laundry Guide:’