Filter
Top Products
Starting your washer
Before starting
your washer:
1. Measure and add detergent.
2. Place sorted load in washer.
3. Start washer.
FILL AREA-
Select WATER
1. TEMPERATURES
l
Match the wash water temperature
to the type of fabrics and soils being
washed.
l
All rinses are cold. Cold rinses save
energy and help prevent wrinkles
from setting into fabrics.
Recommended wash temperatures
can be found in your “Laundry Guide”
and printed under the washer lid.
2. Select CYCLE and WASH TIME; Start the washer
A.
Push in the Control Knob and
turn it to the right. It must be pushed
in and turned only clockwise.
B.
Stop on a number in the cycle
you want. The numbers are minutes of
wash time. The drawing shows 8
minutes of agitation in the REGULAR
HEAVY Cycle. NOTE: In the REGULAR
HEAVY and SHORT Cycles, the washer
will fill only when the knob points to a
“fill” area (shaded in drawing).
4