Filter
Top Products
Starting your washer
I. Measure and add detergent
2. Place sorted load in washer.
3. Start washer.
Select CYCLE and WASH TIME;
1.
Start the washer
FILL AREA
A. Push In the Control Knob and turn
lt to the right. It must be pushed in
and turned only clockwise.
C. Start the washer by pulling out
the Control Knob. After filling, the
washer will agitate for the selected
number of minutes.
6. Stop on a number in the cycle youJ
want. The numbers are minutes of
wash time. The drawing shows10
minutes of agitation in the REGULAR
HEAVY Cycle. NOTE: The washer will
fill only when the knob points to a
FILL area.
D. To stop the washer at any tlme
push In the Control Knob. To
restart the washer, pull out the
Control Knob.