Filter
Top Products
2
To Select a WASH
. WATER TEMPERATURE
HOT WATER
can be selected by
turning the Control Knob to 12 or
14 minutes in the REGULAR HEAVY
Cycle.
All rinses use cold water. This
saves energy and helps prevent
wrlnkles from seflfng info fabrics.
WARM WATER
can be selected by
turning the Control Knob to 8 or 10
minutes in the REGULAR HEAVY Cycle.
l A warm wash is preset in the SHORT
Cycle. Just turn the Control Knob to
the 4 or 6 minute setting in that
cycle.
3
. To Select a WATER LEVEL
HIGH WATER LEVEL.
The washer will
automatically fill to its highest level,
(about 17.3 galsY65.5 L), when the
Control Knob points to a FILL area.
NOTE: The washer will fill
only
when
the knob points to a FILL area.
LOWER WATER LEVELS.
Setting the
washer to fill with less water also sets
it for a shorter wash time.
1.
Push the Control Knob in and turn
it clockwise to a FILL area in the
cycle you want.
2. Pull the Control Knob out; the
washer will start to fill.
3. When the washer reaches the
desired water level,
push In the
Control Knob and
slowly
turn
it past the FILL area.
Pull ouf the
Control Knob to start the washer.
For all rinses, the washer fills
to Its highest level wtfh cold
water.