Filter
Top Products
To sele ct a
WASH
WATER TEMPI
HOT WATER
can be selected only
in the REGULAR HEAVY Cycle. Turn the
Control Knob to12 or14 minutes in the
REGULAR HEAVY Cycle.
Ail rinses use cold water. this saves
energy and helps prevent wrinkles
from sefflng into fabrics.
CRATURE
WARM WATER
can be selected by
turning the Control Knob to 8 ort0 min-
utes in the REGULAR HEAVY Cycle.
l A warm wash is preset in the SHORT
Cycle. Just turn the Control Knob to
the 6 or 8 minute setting in that cycle.
To select a
3.
WATER LEVEL
HIGH WATER LEVEL.
The washer will
automatically fill to its highest level,
(about17.2 galsI65.1 L), when the
Control Knob points to a FILL area.
I 1
lx\ - /////I
LOWER WATER LEVELS.
Setting the
washer to fill with less water also sets it
for a shorter wash time.
1.
Push the Control Knob in and turn it
clockwise to a FILL area in the cycle
you want.
2. Pull the Control Knob out; the washer
will startto fill.
3. When the washer reaches the de-
sired water level,
push in
the Control
Knob and
slowly
turn it past the FILL
area.
Pull
out the Control Knob to
start the washer.
For ail rinses, the washer fills to its
hlghest level with cold water.