Filter
Top Products
If dryer does not
operate properly...
If dryer will not operate, check the following
to be sure that:
A. Electrical supply is connected.
B. House fuse is intact and tight or circuit
breaker has not tripped.
C. Door is closed.
D. Controls are set in a running or “On”
position.
E. Start button has been pushed firmly.
Part No. 3394023 Rev. A
01994 Whirlpool Corporation
r
Floor Damage
Slide dryer onto cardboard or hardboard
before movlng across floor.
Failure to
do so may cause damage to
tloor coverlng.
When moving your dryer...
l
Shut off electric supply to dryer.
l
Disconnect power supply cord and tape
securely to dryer.
l
Tape the drum to the front panel.
l
Tape the dryer door and lint screen.
l
Screw leveling legs all the way in.
Before having your electric dryer installed in
your new home, check with a licensed
electrician to confirm that the supply
voltage matches the voltage specified on
the serial/rating plate.
Prepared by Whirlpool Corporation
Benton Harbor, Michigan 49022
Printed on recycled paper.
10% post consumer waste/
50% recovered materials.
Printed in U.S.A.