Filter
Top Products
Electrlcal Shock Hazard
Unplug dryer before removing
dryer panels.
Wear gloves when handling
dryer parts.
Make sure door switch wires are not
touching the dryer drum before
closing the top.
Failure to do so can result in death,
electrlcal shock, or serious cuts.
If your dryer is gas and has a full front
panel, remove front panel as follows:
1. Unplug the power supply cord or turn off
the electrical power.
2. Open lint screen lid. Remove two screws
from lint screen area.
3. Open top by pulling forward and up at
each front corner (see View A). Rest
raised top against wall behind dryer (top
is hinged at rear).
Remove screws
before opening top
84
View A
continued on next page
15