Filter
Top Products
Completing
Installation
17
l
CHECK ELECTRICAL
19
l
Turn on water faucets and
21
l
Untape and plug power
REQUIREMENTS. BE SURE YOU HAVE
check for leaks. Tighten couplings if there
supply cord into earthed outlet.
CORRECT ELECTRiCAL SUPPLY AND
is leaking. DO NOT OVERTIGHTEN; this
RECOMMENDED EARlHING METHOD.
could cause damage to couplings.
22
l
Read the Use and Care
installed. If there is an extra part, go back
through steps to see which step was
skipped.
your tools. Check that the shipping strap
was removed from the back of the washer
and used to secure the drain hose.
Guide. Start the washer and allow it to
complete the regular cycle.
L
Congratulations!
You have successfully installed
your new Whirlpool washer. To
get
the
most efficient use from your
new
washer, read your Whirlpool Use
and Care Guide.
Keep installation Instructions
and Guide.
Need
Assistance?
Call your dealer or local authorized
service company.
When YOU call, YOU will need the washer
model*numbe; &d serial number. Both
numbers are on the model/serial rating
plate located under the washer lid and
on the top of the washer.
Part No. 3948875
0 1995 Whirlpool Corporation
Prepared by Whirlpool Corporation, Benton Harbor, Michigan 49022
Printed in U.S.A.