Filter
Top Products
7
6 “prewash “button
The machine performs a prewash cycle at 30°C max.
The prewash cycle ends with a short spin at 650 r.p.m.
in programmes for cottons and synthetics, and with
emptying of the water for delicates.
This option is not available with the wool/(handwash)
programme , soak 30 and mini 30.
For use when washing heavily soiled laundry.
7 “extra rinse” button
This option can be selected with all programmes, except
the wool/(handwash) programme , soak 30 and
mini 30. The machine will add 2 rinses for cotton and 1
rinse for synthetics and delicates.
This option is recommended for people who are allergic
to detergents and in areas where the water is very soft.
8 “easy iron” button
By selecting this button the laundry will be gently
washed and spun to avoid any creasing. In this way
ironing is easier. Furthermore the machine will perform
6 rinses instead of 3 for cotton and 4 rinses instead of 3
for synthetics. This function can be used only for cotton
and synthetic fabrics.
If this option is selected for cotton programmes, the spin
speed automaticaly will reduce to 900 rpm.
If this option is selected for synthetic programmes with
a temperature of 60°C, the machine will perform a
washing cycle at max 40°C.
9 “start/pause” button
This button has two functions: start and pause
Start
After having selected the required programme, press this
button to start the machine; the corresponding pilot light
stops flashing.
Pause
To interrupt a programme which is running, press the
“start/pause” button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it was
interrupted, press the start/pause button again.
10 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running phase
light illuminate and stay on. (If you have selected the
“soak” programme the pilot light “prewash”
illuminates”). When the programme has finished, the
“end” pilot light comes on and the door can be opened.
The “end” pilot light flashes in the event of operating
problems.
1 flash = the machine does not fill
2 flashes = the machine does not empty
4 flashes = the door has not been closed
To eliminate the problem, see paragraph “Something not
working”.
If the
“
filter” pilot light flashes at the end of the
programme this means that the drain filter must be
cleaned.
11 Programme selector dial
The selector is divided into 5 sections:
• Cottons
• Synthetics
• Delicates
• Wool (handwashing)
• Special programmes
• Reset programme “off”
PROGRAMME
off
cottons
synthetics
30°
40°
30°
95°
E60°
E95°
E40°
30°
40°
30°
40°
delicates
60°
E60°
40°
soak 30
drain
rinses
spin
softener
mini 30
wool