Tricity Bendix TBWM 1110 Washer User Manual


 
10
The pilot lights corresponding to the different phases
making up the selected programme light on.
If your laundry needs a soak time, turn the programme
selector dial to “soak 30” and then, before starting a
washing cycle, drain the water as described in the “End
of Soak 30 programme ” paragraph.
5. Select the “spin” speed or
“rinse hold”
option
Depress the spin speed button to choose the required
speed or “rinse hold” option : the corresponding light
comes on.
6. Select the required options
The light corresponding to the pressed button
illuminates.
quick
extra
rinseprewash
easy
iron
spin
900
700
500
1100
rinse
hold
prewash
wash
rinse
rinse hold
drain
spin
filter
end
PROGRAMME
off
cottons
synthetics
30°
40°
30°
95°
E60°
E95°
E40°
30°
40°
30°
40°
delicates
60°
E60°
40°
soak 30
drain
rinses
spin
softener
mini 30
wool
7. Start the programme
To start the selected programme, press the “start/pause
button; the corresponding light stops flashing.
The pilot light corresponding to the wash phase which is
running is on.
The machine starts operating.
8. At the end of the programme
The machine stops automatically. The light of the
start/pause” button goes out, the “end” pilot light
illuminates and the door can be opened.
If the “rinse hold” option has been selected, the door
will be locked, the light of the “start/pause” button
goes off, the only “rinse hold” pilot light remains lit to
indicate that the water must be drained before opening
the door.
To empty out the water you can, after turning the
programme selector dial to “off position:
select programme “drain”, the water is emptied out
without spinning
select programme
spin”. Select the spin speed by
means of the relevant button and then press the
start/pause” button. The water is emptied out and
the laundry is spun at the selected spin speed.
At the end of the cycle, and the
end” light illuminates.
The door can be opened.
Turn the programme selector dial to Reset “off”.
Switch the machine off by pressing the “on/off” button.
Remove the laundry from the drum and carefully check
that the drum is empty.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.
start/
pause