Filter
Top Products
8
Operating Sequence
Before the first wash, we recommend that you pour 2
litres of water into the main wash compartment of
the detergent drawer in order to activate the ECO valve.
Then run a cotton cycle at 60°C, without any laundry in
the machine, to remove any manufacturing residue from
the drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 6 KG OF WHITE COTTON AT 95°C
Suppose you have 6 kg of heavy soiled laundry to wash.
It is white cotton and is suitable for high temperature
washing.
1. Load the laundry
Open the door by pulling the door handle outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required, pour it
into the main wash compartment and into the
compartment marked if you have selected the
“prewash” option.
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
“MAX” mark in the drawer). Close the drawer gently.
P1174
P1175
P0004
3. Select the required programme
Turn the programme selector dial to the programme 1.
The light “start pause” starts to flash
.
The pilot lights
corresponding to the various phases making up the
programme come on.
4. Select “8 H” or “4 H”
option
Press the option button repeatedly, to select the desired
option. The relevant light illuminates.
5. Select the required option
Select “rinse hold” or “spin reduction” option if
required, the corresponding light illuminates.
rinse
hold
spin
reduction
half
load
4 H
8 H
1
4
5
6
7
8
2
3
10
13
9
15
12
14
11
PROGRAMME
132991640.qxd 06/10/2003 17:08 Pagina 8 (Nero/Process Black pellicola)