Filter
Top Products
· The Pole (1) connects the Pole Top (not shown) to the
main unit at the Pole Base (2). The Pole Top is comprised of the
Clothes Hanger Hook and the Steam Nozzle Holder. The Clothes
Hanger Hook allows you to steam garments that are hanging
from a clean, rust-free hanger, while the Steam Nozzle Holder
provides a safe and convenient place to hang the Steam Nozzle.
· The Water Tank (3) is the reservoir where water is placed for use
by the steamer. Water is placed in the Water Tank by removing
the Water Tank Cap (4), exposing the inlet into which water
can be poured.
· The Carrying Strap (5) can be used to safely lift the unit off of the
ground and carry it up flights of steps or other obstacles over
which the unit cannot be rolled.
· The Lighted On/Off Switch (6) provides a visual indication of
whether or not the steamer is in use.
· The Drain Plug (7) can be removed for easy drainage of the Water
Tank.
· The Power Cord (8) plugs into a standard three-prong electrical
outlet.
· The Rolling Casters (9) allow for quick and effortless movement
of the steamer over flat, stable surfaces.
· The Hose Base and Electrical Plug Receptacle (10) is the point to
which the Hose attaches to the main unit. The Hose (11) is the
delivery system for the steam to be transmitted from the Water
Tank to the Steam Nozzle.
· The Handle (12) is permanently attached to the Steam Nozzle, and
provides a safe point to grip and direct the flow of steam.
· The Steam Trigger (13) must be depressed in order for
steam to be emitted from the Steam Nozzle.
· The Steam Nozzle (14) is the aperture from which steam flows
and is spread over a wide area.
· The Water Filter works to purify the water in the Water Tank,
ensuring that the steam you use is as clean and pure as possible.
The Water Filter is replaceable (see page 3 of this manual for
information on ordering replacement filters).
7
SF-465 Q
UICK
S
TEAM
TM
P
ROFESSIONAL
P
RODUCT
I
NFORMATION