Filter
Top Products
Before Using
Before Using
Special function introduction
Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
Installation and adjustment
Alarming function when open the cover:
During working except for water and drain, the machine will stop running and
alarm if opens the cover.
Child safety lock program
1. Purpose
Child safety lock program is an added function of the washing machine. The purpose is protecting children
from potential dangerous, which due to children climb onto washing machine and open the top lid, results in
falling into washing tub and drowned. The process of this program as follows: when the child safety lock
program has been started up; then if the top lid is opened, the machine will alarm immediately. If it cannot be
dealt with duly (the way of solving: release child safety lock program), the machine will drain if there has
water in washing tub after 15 seconds. After 10 minutes, the power is off automatically. So this can reach the
purpose of protect children without care from potential dangerous.
2. Start up child safety lock program
The program is optional anytime after the machine has been started. Push and hold PROCEDURE SELECTION
and RESERVATION buttons for more than 2 seconds at the same time. After 2 beep sounds, the child safety
lock program works; all buttons are locked and cannot be selected.
3. Release child safety lock program
Similarly, push and hold PROCEDURE SELECTION and RESERVATION buttons for more than 2 seconds at
the same time. After a beep sound, the child safety lock program is released; all buttons are unlocked.
4. Notice items
# Child safety lock program is an added function. Only when it has been started up, it can work.
# It is necessary for selecting child safety lock program, which the top lid must be closed.
# The top lid cannot be opened after this program has been selected. Once the top lid is opened, the machine
will enter into alarming status. It is necessary to release child safety lock program.
# The child safety lock program can be optional only when the machine has been started.
# After the child safety lock program takes effect, all buttons are locked and cannot be selected. Only when
the program has been released, the buttons can resume its function.
# During start or release this program, the current wash program of washing machine shall not be affected
except for the beep sound.
# The power is off or pull power plug off, the child safety lock program is released automatically. The program
cannot be remembered after the power fails.
Install bottom plateInstall lint filter
After you open the package, please lean the washing
machine gently down on soft items ( like the towel cloth,
blanket, etc. ). Install the bottom plate to the bottom of
the machine with the seven screws by a cross screwdriver,
then lift the machine up gently. See to the figure:
Install
Push lint filter downward to l .ocation for lint filter
14