Filter
Top Products
Using process
Using process
TTL-700
+
Remarks: After pressing POWER ON/OFF to connect power supply, if the washing machine
lasts idle more than 10 min, it would automatically shut off the supply.
POWER
ON / OFF
START
PAUSE
RESERVATION
SURPLUS(MIN)
RESERVE
(HOURS LATER)
Lock
Numeral tube
To indicate -- during sensing.
To indicate remaining min. During program
running.
To indicate remaining reserved time (hrs)
during reservation period.
To indicate fault symbols for abnormal
conditions (see page 17)
Page 17
START/PAUSE button
After the power is switched on, press it to
start the machine
During working, push it to pause.
During pause, push this button to restart
and go on working.
Press POWER ON/OFF button to connect
power supply.
After power is connected, pressing this
button will cut off the supply.
POWER ON/OFF button
RESERVATION button
Push the button to select the reserve
washing time from 2 to 24 hours.
Pressing the button, the numeral tube
displays the reserved hours to the wash
cycle end. The point light flashes to
indicate in-reservation.
Child safety lock program
Start up:
The program is optional anytime after the machine hasbeen
started. Push and hold PROCEDURE SELECTION and RESERVATION
buttons for more than 2 seconds at the same time. After 2 beep sounds,
the child safety lock program works; all buttons are locked and cannot
be selected.
Release: push and hold PROCEDURE SELECTION and RESERVATION
buttons for more than 2 seconds at the same time. After a beep sound,
the child safety lock program is released; all buttons are unlocked.
1
12