Filter
Top Products
5
Power ON light
Illuminates to indicate that the iron is connected
to the power outlet and the power is turned on. The
power ON light doubles as the steam dial indicator.
Safety auto-off
The iron automatically switches itself off if left in the
ironing position (horizontal) for 30 seconds, or in the
heel rest position (vertical) for 15 minutes.
(For more information on the safety
auto off feature see
page 7).
Extra long cord with 360º cord outlet
The 360 degree cord outlet allows free movement of
the cord in any direction for greater manoeuvrability
when ironing. The flexible grommet protects the cord
from fraying.
Temperature indicator light
Align the desired setting with the temperature
indicator light.
Boost light
Illuminates to indicate that the iron is heating
and goes out when it has reached
the temperature
selected on the temperature dial. The boost light
cycles on and off during ironing as the iron
maintains the selected temperature.
Stable heel rest
Extra large heel rest keeps the iron stable on the
ironing board.
Cord wrap facility
The built-in cord wrap facility allows you to wind the
cord around the heel for neat and tidy storage of the
cord when the iron is not in use.
Temperature dial
Allows you to select the desired temperature for
each garment. The adjustable temperature dial
also indicates the amount of steam recommended
for use on each temperature setting.
Variable steam
The six-position steam dial allows you to select the
desired steam output for each garment. Alternatively,
select the DRY setting to iron without steam.
Removable steam valve
The steam valve is connected to the steam dial,
and is removable to allow for easy cleaning.
Cleaning it regularly removes scale build-up
that can affect its performance.
(For instructions on how to clean the
steam valve see the care and
cleaning section on page 8).
Soft grip handle
The soft rubber grip handle allows for increased
comfort during ironing.
Drip-stop steam system
The drip-stop steam system automatically stops water
flowing to the steam chamber should the temperature
fall too low to generate steam. This prevents dripping,
even at low temperatures.
Figure 1
5