Filter
Top Products
Wash And Rinse Water Temperatures Are Incorrect
•
The hot water hose and cold water hose are connected
to the wrong faucets.
Water
Is Entering Washer But Tub Does Not Fill
•
Standpipe for the drain hose is not the correct height.
(Fig. 2), drain hose is to far into standpipe or air break
does not exist.
Water Leaks
•
Hose connections at faucet and/or machi
ne not tight.
•
Rubber washers are not inside the metal hose
connectors (Fig. 3).
•
Drain hose not securely fastened (Fig.
1,2). Drain
pipes in the house are clogged.
•
Too much detergent or a high sudsing detergent in soft
water is being used.
•
Soil
may be on the door seal or gasket of the washer
preventing a tight seal.
Water In Washer Does Not Drain Or Drains Sl
owly
•
Drain hose is kinked or clogged (Fig. 1).
•
Standpipe does not have a large enough diameter and
is slowing the draining process.
•
Machine is over soaped.
•
Wash filter plugged.
Over Sudsing
•
Too much detergent used.
•
Detergent used is not compatible with water cond
i-
tions.
•
Garments were pretreated, before washing.
•
Additional laundry aids such as oxygen bleach may
cause additional sudsing.
"
Chugging" Noise"
•
A certain amount of "chugging" noise is normal in a
heavy
-
duty machine.
Rattling And Clanking Noise
•
Foreign o
bjects such as coins or safety pins may be in
the tub.
•
Foreign objects may be in the pump.
•
Belt buckles and metal fasteners ar
e hitting the washer
tub during the washing cycle.
Vibrating Noise
•
Washer is not level and lock nuts may not be securely
tightened on front adjusting feet.
•
A rubber cap may be missing from one of the leveling
legs.
•
Washer may not be installed on
a solid, firm floor.
•
The four shipping brackets are still on the machine.
Thumping Noise
•
Heavy wash loads may produce a thumpi
ng noise at
the beginning of the spin cycle.
Page 14