Filter
Top Products
-26-
201472
Water Leaks • Check that fill hoses are properly installed on the faucets and the washer’s water mixing
valve.
• Replace the fill hoses every five years.
• Make sure drain receptacle is not clogged.
• Check house plumbing.
• Laundry load may be oversudsing or overloaded. Use less detergent (or low-sudsing
detergent) and proper load sizes.
Is Noisy • Wash load may be unbalanced. Open lid and redistribute the load.
• Make sure washer is level. Uneven leveling can cause vibration.
Load Is Too Wet • Wash load may be unbalanced. Open lid and redistribute the load.
• Load is too small. Add items to make full load.
• Make sure the correct spin speed is selected for the type of items being washed (if
option is available on your model).
Wrong Water Temperature • Make sure that the controls are properly set.
• Check fill hoses. Make sure hot faucet hose is connected to hot mixing valve (indicated
with “H” on the valve bracket) and cold faucet is connected to cold mixing valve (indicated
with “C” on the valve bracket).
• Make sure house water heater is adjusted properly.
Washer Symptom Possible Cause / Solution