-12-
201472
7. Set Fabric Selector (on select models only).
8. Select Extra Rinse (on select models only) if
desired.
9. Select the cycle according to the type of
fabric being washed. Push the timer knob in
and turn clockwise to the desired cycle and
wash time.
10. Pull the timer knob out to start the water fill.
Agitation will begin when the water reaches
the level you selected.
NOTE: Lid must be closed for agitation and spin
to start.
The washer will stop (pause) shortly before the
wash and rinse spins. Do not turn the timer
through these pauses. They are part of the
cycle.
Timer
Although the washer cycles are automatic, the
timer may be reset to lengthen, shorten or repeat
a portion of a cycle.
To set or reset the timer, push timer knob in to
stop the washer. Hold timer knob in firmly while
turning it clockwise to the setting desired. Pull
timer knob out to start the washer.
Manual Soaking
Set the timer knob in the center of the word
“RINSE” (this prevents the washer from spinning
without first filling with water). Place the soaking
product and clothes load in the washtub. Pull
timer knob to start washer fill. After fill is
completed and agitation has started, (lid must
be closed) push the timer knob in. This will stop
the washer. When the clothes have soaked the
desired length of time, TURN THE TIMER KNOB TO
THE START OF THE SPIN SETTING, then pull the
timer knob out to start the spin.
TLW2074N
TLW2074N
TLW2000N
Failure to turn the timer knob to the spin
cycle and completely drain the washtub
after soaking will result in the washer
overflowing and cause property damage.
W524
CAUTION