Filter
Top Products
GB
starting from 600 rpm up to 900 rpm.
H
Options buttons
The options that may be available on the washing machine
are shown below.
Quick wash Button
This button reduces the overall duration of the washing cycle. This
option is used to wash small loads or less dirty washing in less time.
The bleach stage is skipped when the Quick Wash button is
pressed (for models with bleach function).
Increase water button
This washing machine is programmed to use a certain quantity of
water and consume a certain amount of power considered to be
sufficient for a normal washing cycle.
Only press this button for specific requirements, e.g.: for very
delicate fabrics (curtains or wool).
The water level for washing and rinsing rises and power
consumption for heating increases.
Easy-iron button
This option reduces creasing on garments at the end of the
programme. The machine performs a more delicate spin cycle and
moves the garments at the end of the programme. Spin speed for
all programmes is 600 rpm.
Economy cycle button
- e
Press this button for cottons programmes, the machine will
perform an extended wash at 35°C (biological step) thereby
offering good washing performance combined with power
saving.
The machine then continues the cycle at the selected
temperature.
N.B.:
Press the economy cycle button to obtain a maximum washing
temperature of 60° C and the elimination of the pre wash cycle.
Extra Rinse button
In areas with soft water or to improve rinsing, press this button
(optional for intensive programmes) to enable the extra rinse
function (about 20% more water).
Delicates button
Press this button to reduce movement of the drum and,
consequently, of the washing. Suitable for particularly delicate
garments (shirts, silk, curtains, etc.)
Half load button
1/2
If the machine is used with a smaller amount of washing than that
indicated in the “Programme Chart”, press this button to save water,
detergent and electricity.
This option should not be used for synthetics or woollens.
The recommended doses of detergents should be reduced in
proportion to the load.
I
Options enabled LED's
These LED's light up when the relative option button is
pressed and indicate that the option has been selected. They
remain on until the machine switches off or a different
selection is made.
L
“Start/Pause” button
Press this button to start the selected washing programme.
During washing, press the “Start/Pause” button for about 3
seconds to pause the washing cycle. During the pause, the
“Time remaining” Led flashes and STOP appears on the
1
0