Filter
Top Products
11
MAIN FUNCTIONS OF THE WASHING MACHINE
S Led Start
C Optional function buttons
L Start button
P Programme and temperature knob
C
L
SWM65EG
S
P
GB
USING THE WASHING MACHINE
(follow these instructions and the washing machine will run the selected wash cycle)
1. Open the door.
2. Load the washing in the drum and close the door.
Warning: Do not overload the machine. It is not ad visable to wash items that absorb lar ge
quantities of water such as carpets.
3. Add a low-suds detergent and softener designed for automatic washing machines in the respective
compartments of the detergent drawer (see chapter “USE OF DETERGENTS”).
4. Close the detergent drawer. Do not open the drawer while the machine is working as this may
cause water to spill out.
5. Rotate the programmer knob (P) to select the required programme and temperature according to
the type of fabric to wash (see: “PROGRAMME TABLES”).
6. Select the (C) buttons with the functions required (see “OPTIONAL FUNCTIONS”).
7. Press button (L) to start the wash cycle (see “START BUTTON”)
8. At the end of the wash cycle, turn the program selector knob (P) on “STOP” and the light (B) will
switch off.
9. Open the door and remove the washing.
10. With dry hands, unplug the washing machine from the mains supply.
11. Close the water feed valve.
WASH CYCLE:
“EASY LOGIC” TECHNOLOGY
The electronic washing machine is f tted with an “EASY LOGIC” system that automaticall y
recognises the quantity of washing loaded. The machine can thus regulate the amount of water
to use for the wash and pr oportion the wash time accor dingly, thus saving water, time and
energy. In the case where the amount of washing is less than the maxim um recommended
load (see technical characteristics table), the quantity of water used f or the wash will be re-
duced by 2 litres for each kg less of washing. In the case of a half-load or less, the machine
will automatically carry out one rinse less than programmed. N.B. The “EASY LOGIC” function
is only active for cotton programmes.