Filter
Top Products
GB
12
Economy cycle button
-
e
Press this button for cottons programmes, the machine will
perform an extended wash at 35°C (biological step) thereby
offering good washing performance combined with power
saving.
The machine then continues the cycle at the selected
temperature.
N.B.:
Press the economy cycle button to obtain a maximum washing
temperature of 60° C and the elimination of the pre wash cycle.
Extra Rinse button
In areas with soft water or to improve rinsing, press this button
(optional for intensive programmes) to enable the extra rinse
function (about 20% more water).
Delicates button
Press this button to reduce movement of the drum and,
consequently, of the washing. Suitable for particularly delicate
garments (shirts, silk, curtains, etc.)
Half load button
1/2
If the machine is used with a smaller amount of washing than that
indicated in the “Programme Chart”, press this button to save water,
detergent and electricity.
This option should not be used for synthetics or woollens.
The recommended doses of detergents should be reduced in
proportion to the load.
O
“Start/Pause” button
Press this button to start the selected washing programme.
During washing, press the “Start/Pause” button for about 3
seconds to pause the washing cycle. During the pause, the
“Time remaining” Led flashes and STOP appears on the
display. To resume the washing cycle from where it left off,
simply press the “Start/Pause” button again.
P
Timed drying shown on
display LED
This LED indicates that drying is carried out with the selected
drying time.
Q
Automatic drying activation
with humidity sensor
shown on display LED
This LED indicates that drying is carried out automatically
with the selection of the required residual humidity level (Aut1
or Aut2)
R
Button activation shown on
LED
This LED indicates that the corresponding buttons have been
pressed.