Smeg SLB510 Washer User Manual


 
Instructions for Use24
Trouble-Shooting Guide
The user can come across troubles appearing during the operation of
the appliance. We are listing some of troubles, which in most cases
result from improper handling of the appliance and can be eliminated by
yourself.
Problem: Check the following:
The machine doesn't operate (the control lamp is off):
Check the power supply and fuses.
Is the plug correctly plugged in the socket?
Water is not pumped into the machine:
Is the machine switched on?
Is the water tap open?
Is the wire-net filter on the inlet hose clean?
Is the door well closed?
The machine jumps during operation:
Are the transport brackets removed?
Is the machine correctly levelled?(if not, use the adjustable legs).
Check the load (perhaps you are washing only one large item).
The machine is leaking:
Is the lint filter properly fixed?
Is the inlet hose properly secured to the tap and to the machine?
The laundry is too wet:
Is the lint filter clean (free of solid particles)?
Check whether the wall siphon drain is clogged (clean it).
Too much bubbling during washing:
Check the water hardness and reduce the quantity of washing
powder you are using.
Washing was not efficient (stains, greasy clots):
Have you chosen the correct wash programme? Use larger
quantities of washing powder for heavily soiled laundry, or wash
smaller loads.
Laundry is not well rinsed (wash powder residues):
Is the lint filter clean (free of solid particles)?
Perhaps you overloaded the machine (especially delicate
fabrics) and used too much washing powder.
Check whether the wall siphon drain is clogged (clean it).