Filter
Top Products
6
SM2706
GB
WARNING!! The washer/drier version must not be installed behind a locked door, a
sliding door or with a hinged door on the opposite wall to the washer/drier itself.
For transport reasons, the washing machine’s oscillating group
is locked in place by 4 spacers and screws. Before using the
machine, remove the spacers and locking screws. Keep the
screws and spacers for future use.
Close off the holes using the plugs supplied. The plugs can be found in
the bag containing the documents.
The machine must be installed by professionally qualifi ed technicians, according to the manufacturer’s
indications. Incorrect installation may result in damage to persons and property.
The machine can be installed anywhere, provided the temperature in the place of installation is not
below 3°C and the cables and hoses at the rear of the machine are not crushed in any way.
V
2
3A
2A
3
For transport reasons, the washing machine’s oscillating group
is locked in place by 4 spacers and screws. Before using the
machine, remove the locking screws with a suitable tool.
Insert a screwdriver in the holes and lever out the 4 plastic spacers as
shown in the fi gure.
INSTALLING THE MACHINE
(ACCORDING TO MODEL)