15
SM2706
OPTIONAL FUNCTIONS
GB
DRYING:
By turning this knob it is possible to select the length of drying, expressed in minu-
tes, both in automatic mode (at the end of the wash cycle) and in manual mode (for
hand-washed garments).
(see table “RECOMMENDED DRYING QUANTITIES AND TIMES”).
N.B.: The use of the optional functions depends on the type of programme
selected. Consequently, if the wash programme does not include the function,
the button cannot be enabled (see PROGRAMME TABLE”.
USING THE WASHER/DRIER:
USING THE DRIER:
Drying may be continuous, at the end of the “Cotton” and “Synthetic” wash cycles, or in manual mode (if
for example the garments have been hand washed), by turning the program dial to the specifi c program
“Dry”. Before selecting the manual drying function, the washing must fi rst be spun at a minimum speed
of 800 rpm. For the machine to carry out drying, the time must always be selected fi rst using the relevant
knob, both in automatic and in manual mode. (see table “RECOMMENDED DRYING QUANTITIES
AND TIMES”).
CONTINUOUS WASH/DRY PROGRAMME (COTTON AND SYNTHETICS):
Place the washing in the drum (see table “RECOMMENDED DRYING QUANTITIES AND TIMES”).
Select the required wash program using the programmer knob. Set the required functions using the various
buttons. Select the required drying time by pressing the
“Time” button. Then press the Start button.
MANUAL DRY PROGRAMME:
If the washing (Cotton or Synthetics) has been hand washed outside the machine, a complete spin cycle
must be carried out fi rst to eliminate excess water from the fabric.
At the end of this cycle, select the program “Dry” on the programmer knob and set the drying time using
the “Time” knob (see table “RECOMMENDED DRYING QUANTITIES AND TIMES”). Press Start to
start the drying cycle.
SPIN EXCLUSION:
When this button is pressed, the machine carries out a wash cycle and stops before
spinning. The button lights up.