Smeg AS73CES Clothes Dryer User Manual


 
15 - EN
Auxiliary function
Cancel audio warning
Your dryer will give an audio warning when
the programme comes to an end. If you
do not want to hear the audio warning,
press “Cancel Audio Warning” button.
The relevant light will turn on when this
button is pressed and an audio warning
will not be given when the programme
comes to an end.
C You can select this function either before
or after the programme starts.
Warning indicators
C Warning indicators may differ according
to the model of your dryer.
Filter cleaning
A warning light will turn on to remind filter
cleaning after the programme finishes.
C If the filter cleaning warning light
lights up continuously, please refer to,
“Suggested solutions for problems”.
Water tank
Warning light starts flashing when the
tank is filled with water. The dryer stops
operating if the warning light turns on when
a programme is running. Drain the water
in the water tank to restart the dryer. Press
“Start/Pause/Cancel” button to start the
programme after you have emptied the
water tank. The warning light turns off and
the programme resumes operating.
Time delay
If you wish to dry your clothes at a later
time, thanks to the time delay function, you
can delay the program start up to 3 hours,
6 hours or 9 hours.
1. Open the loading door and put the
laundry in.
C Make sure that all air outlets are open,
door filter is cleaned and the water tank
is empty.
2. Set the drying program and, if required,
the auxiliary functions.
3. When the time programming button is
pressed once, a 3 hour delay is selected
and the relevant led lights. When the
same button is pressed again, 6 hours;
and if pressed once more, 9 hours delay
will be selected. If the time programming
button is pressed one more time, time
delaying function will be cancelled. Set
the time delay as you require.
4. Delayed operation of the selected
program is started by pressing the "Start/
Pause/Cancel" button after selecting the
time delay.
C Additional laundry may be loaded / taken
out during the time delay period.
C During the time delay period, laundry is
rotated for 4 seconds in every 10 minutes
to prevent creasing.
Canceling the time delay
If you want to cancel the time delay
countdown and start the program:
1. Press “Start/Pause/Cancel” button for
about 3 seconds.
2. Press “Start/Pause/Cancel” button to
start the program right away.
Starting the programme
1. Press “Start/Pause/Cancel” button to
start the programme.
2. Light of the “Start/Pause/Cancel”
button will turn on to indicate that the
programme has started.
Progress of program
Progress of a running program is shown
through the program follow-up indicator.
At the beginning of every program step, the
relevant indicator LED will light up and light
of the completed step will turn off.
“Drying”:
- Drying level will be illuminated during
the whole drying process until the drying
degree reaches “iron dry”.
“Iron Dry”:
- Starts to illuminate when the drying
degree reaches “iron dry” step and remains
illuminated until the next step.
“Ready to wear”:
Starts to illuminate when the drying degree
reaches “Ready to wear” step and remains
illuminated until the next step.
“Final / Anti-creasing”:
- Illuminates when the program comes
to an end and anti-creasing function is
activated.
C If more than one LED light up or
flash concurrently, it means there is
malfunctioning or a failure (please see,
Solution suggestions for problems).