Smeg 129316 Clothes Dryer User Manual


 
129316
By the user
After drying be careful when extracting
laundry from the appliance, as it may be
hot!
Suspending the operation by pressing the
START/PAUSE button.
In case you press the START/PAUSE button (D)
during the drying procedure, the drying program is
suspended, and with the next press of the same
button the program is resumed where it had been
interrupted.
Changing the program or the functions
If you wish to change the drying time during the
drying procedure, move button (A) to the position
“0” (for about 1 second), set new drying time and
press the START/PAUSE button (D).
The same procedure applies if you wish to change
settings (selection of functions by means of
buttons).
Door opened
If the door is opened during the drying process
this will pause the operation (the (E) LED ashes
intermittently). The drying process is resumed by
closing the door and pressing the START/PAUSE
button (D) from the point where it had been
interrupted.
Power failure
If a power failure occurs during the operation of
the dryer, this requires that drying time is reset
again, and all extra functions are reselected
(LED E ashes as at the commencement of the
program).
13
Interruptions