Filter
Top Products
97-6068, 97-6131 • REV. 3/06
OPERATOR’S MANUAL
PRESSURE WASHER
6
COMPONENT IDENTIFICATION - MINI SERIES
Pump — Develops high pressure.
Rupture Disc — Opens when pressure exceeds safe
operating temperature.
Spray Gun — Controls the application of water and
detergent onto cleaning surface with trigger device. In-
cludes safety latch.
High Limit Thermostat — Controls water tempera-
ture.
Variable Pressure Control Wand — Must be con-
nected to the spray gun. This wand handle controls
dishcharge flow from one tube to both wand tubes.
When water is discharged from both tubes you will have
a pressure loss and allows chemical siphoning when
used in combination with a detergent injector.
High Pressure Hose — Connect one end to water
pump discharge nipple and the other end to spray gun.
Note: If trigger on spray gun is released for more
than 2 minutes, water will leak from valve. Warm
water will discharge from pump protector onto
floor. This system prevents internal pump dam-
age.
Rupture
Disc
Fuel Tank
Wand Holder
Fresh Water
Faucet
(not included)
Garden Hose
(not included)
High Pressure
Hose
Burner
Motor
Insulated
Spray Gun
Variable Pressure
Insulated Wand
Control
Handle
Burner
Chamber
Unloader
Discharge
Nipple
GFCI
Nozzle
Coupler
Pump
High Limit
Thermostat