Sanyo ASW-A85HT Washer User Manual


 
ASW-A85HT
INSTRUCTION MANUAL
MICROCOMPUTER CONTROL
FULLY AUTOMATIC WASHING MACHINE
MICROCOMPUTER CONTROL
FULLY AUTOMATIC WASHING MACHINE
Before operating this washing machine, please read
these instructions carefully and completely.
Before operating this washing machine, please read
these instructions carefully and completely.
WARNING - This appliance must be earthed.
IMPORTANT
The wires in this mains lead are coloured in accordance with the following code:
Green/yellow: Earth Blue: Neutral Brown: Live
As the colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals in your plug, proceed as follows:
Light
The wire which is coloured green and yellow must be connected to the terminal
in the plug which is marked with the letter E or by the earth symbol
or coloured green or green and yellow.
The wire which is coloured light blue must be connected to the terminal which is
marked with the letter N or coloured white.
The wire which is coloured brown must be connected to the terminal which is marked
with the letter L or coloured black.
SPECIFICATIONSSPECIFICATIONS
560(W) x 535(D) x 950(H) mm
50 litres
AC Local voltage
Dimensions
Power Source
Water level (HIGH)
Power Consumption
Required Water Pressure
330 W
0.03 MPa ~ 1.0MPa
(0.3 kgf/cm ~ 10 kgf/cm )
2 2
FOR WASHER PLUG TOP 3 PIN
● If the 2-pin type of socket-outlet has a grounding terminal,
securely attach the end of the Grounding Wire to the
terminal.
● When grounding the washer, connect the grounding wire
before plugging in the Power Cord.
● If the 2-pin type of the socket-outlet has no grounding
terminal, consult your nearest dealer or securely attach
the end of Grounding Wire to a suitable grounding point,
such as a metal cold water pipe.
Never connect the Grounding Wire to a gas pipe.
● Unplug the Power Cord before disconnecting the
Grounding Wire.
For BS Standard Plug With A 13 Amp Fuse
( )
Grounding
Terminal
Grounding
Wire Of
Washer
Grounding
Wire
Grounding
Rod
FOLLOWING CAUTIONS ARE FOR WASHER USING DOUBLECORE
CORD ONLY.
SANYO Electric Co.,Ltd.SANYO Electric Co.,Ltd.
CODE NO.301-6-421S-032-40BCODE NO.301-6-421S-032-40B