Filter
Top Products
English - 19
BEFORE YOU START
STEP 3 - Set Auto Dispense
The Auto Dispense unit dispenses an appropriate amount of detergent and fabric softener into the
drum according to the course and cycle.
1. Both Auto Detergent and Auto Softener are set
to On by default. To change the setting, slide the
corresponding bar to O.
2. Set the Amount and the Water Hardness.
3. Set the Amount and the Concentration.
4. Tap Next.
Step 3 of 4. Set Auto Dispense
Auto Detergent
On On
Previous Next
Amount
Less Std. More
Soft Medium Hard Normal 2X High
Less Std. More
Amount
Water HardenessConcentration
Auto Softener
STEP 4 - Set Auto Update
Auto Update updates the firmware automatically for improved performance and/or to fix known
bugs through communication with the update server. Once the firmware is updated, some
functions of the washing machine may not be available depending on the firmware version.
1. To update the firmware automatically, set Auto
Update to On.
2. Tap Done.
Step 4 of 4. Set Auto Update
On
Previous Done
The Auto Update function automatically updates the software for
performance improvement purposes ot to x bugs through
communicating with the update server. If you agree to this setting, it is
regarded as an agreement to running the auto update operation. When
the software is updated, some software features may become
STEP 5 - Run Calibration (recommended)
Calibration ensures accurate weight detection by the washing machine. Make sure the drum is
empty before running Calibration.
1. Tap Settings > Calibration > Start.
• The door will be locked during the operation.
• The drum keeps rotating clockwise and anticlockwise for several minutes.
2. When complete, the washing machine turns o automatically.
Untitled-2 19 2014-09-12 3:35:09