Samsung WM1245A Washer/Dryer User Manual


 
Washing a Load of Laundry
12
SAMSUNG
Washing Machine Owners Instructions
Using Dry course
Refer to the label of drying capacity and be sure to put in the clothes to the lower level than
the marked line for the dried clothe of 6.0kg.
1. Open the door, put in the clothes and close the door again.
2. Press the POWER button.
:The standard course will be selected automatically.
Drying is availably selected only at the courses such as Cotton, Baby cotton, Towel,
Coloureds and Quick.
3. Select Drying Time or Drying Selector button as follows.
:Drying Time: selectable in the following order of 10min 30min 70min 100min
CANCEL.
Drying Selector: repeatedly selectable in the following order of Standard Drying
Sterilization Drying Delicate Drying Cancel.
It automatically displays Drying Time by sensing the weight of clothes before drying for
increasing the drying effect.
4. Put suitable amount of detergent and fiber softener in the detergent tray and close it
again.
5. Press Start/Pause button.
:It automatically performs an optimal function from washing to drying.
Remark:
Drying Time and Drying Selector can’t be selected at the same time.
The selected course can’t be altered after the start of drying.
If you select Drying function, the intensity of SPIN will be set up as 1000rpm in default
for increasing the drying effect.
If cold water is not supplied, drying will not be performed.
If you do not take out clothes from the tub after the end of drying, a function of wrinkle
protection will be performed for about 3 minutes with the display of [End].
In order to take out the clothes: press firstly PAUSE or POWER button and take them
out.
In case you wish to dry after hand washing, select both SPIN and Drying at the same
time.
➔➔➔
➔➔