Filter
Top Products
Washing a Load of Laundry
SAMSUNG
Washing Machine Owner’s Instructions 9
8. Drying Selector button
Every press of this button will select drying type repeatedly in the following order:
Standard Drying Sterilization Drying Delicate Drying Cancel.
❈
Drying Time button can’t be selected together with Drying Selector button.
9. Delay Start selection button
Press the button repeatedly to cycle through the available delayed start options (up to 24
hours mximum in one hour increments).
Displayed hours means the time of finished washing-cycle.
10. Fuzzy Control dial
Turn the dial to select one of the 9 available wash programs.
11. Start/Pause selection button
Press to pause and restart programs.
12. Power selection button
Press once to turn the washing machine on, press again to turn the washing machine off.
If the washing machine power is left on for longer than 10 minutes without any buttons
being touched, the power automatically turns off.
For the Silver Wash washing
The Ag+ water is added during the washing, and then a sanitary, sterilizing washing will be
performed. During the rinse, the Ag+ water is added at the last time of rinse. It treats clothes
with silver antibiotic coating and functions to protect the propagation of bacteria.
1. Open the door, put in the clothes and close the door again.
2. Press POWER button.
3. Select a course by turning the course selection dial.
4. Press Silver Wash button.
5. Put suitable amount of detergent and fiber softener in the detergent tray, and close it again.
:Put a suitable amount of detergent in the detergent tray for main washing, and put in
fiber softener to the lower level than the marked line.
For Prewash, put a supplementary detergent in the detergent tray.
❈
Silver Wash: If it is used together with fiber softener, its effect may be decreased.
6. Press Start/Pause button.
:It automatically performs an optimal washing with sensing the weight of clothes.
➔➔➔