Filter
Top Products
9_ Washing a load of laundry
WASHING CLOTHES MANUALLY
You can wash clothes manually without using the Fuzzy Logic feature. To do so:
1. Turn on the water at the water source sink.
2. Press the
(On/Off ) button on the washing machine.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling.
5. Close the door.
6. Put the detergent in the detergent drawer .
7. Repeatedly press the Program button to select the cycle you prefer:
Cotton, Baby cotton, Synthetics, and Quick wash...
8. Press the Spin button to select the spin speed (No Spin, 400, 800,...,No Spin,...)
9. Repeatedly press the Function button to select the cycle you prefer (Prewash, Rinse
+
, Rinse
hold, ... )
10. Press the Temp button to select the temperature (cold water , 30˚C, 40˚C, 60˚C, 95˚C).
11. Press the Start/Pause button and the machine will begin the cycle.
When the cycle is finished:
1. Open the door.
The door will not open until 3 minutes after the machine stops or the power turns off.
2. Remove laundry.
The slow rotation of the drum is not a sign of failure after the last spin of Cotton, Baby
Cotton, or Quick Wash cycles. This is a function that allows the user to remove laundry
easily’
SELECTING OPTIONS
Prewash
Prewash is only available when washing cotton, Baby cotton, synthetics, delicate clothes. To use
prewash:
1. Load the prewash detergent into compartment of the detergent drawer.
2. Select “Cotton”, ”Baby cotton” or ”Synthetics” with the Program select button.
3. Press the Function button until the “Prewash” indicator lights up on the control panel.
4. Press Start/Pause to begin the cycle.
Rinse+
Your machine will run through an additional rinsing cycle.
The washing duration will be prolonged accordingly.
Rinse Hold
The laundry remains soaking in the final rinse water.
Before the laundry can be unloaded, the “
Spin” program must be run.
washing a load of laundry
WF7704NAW-02450J_EN.indd 9 2007-07-13 ¿ÀÈÄ 6:46:53