Filter
Top Products
setting up your washer _13
Memory program
Use this program to create your very own favorite or frequently used programs and store them in
the washer so that you can select them at any time.
1. Press the Power button to turn the washer “On”.
2. Press the Program select button.
3. Select your frequently used functions.
Select Wash, Rinse, or Spin according to your requirements.
4. Press the Start/Pause button to store them.
Only stored when the Wash + Rinse + Spin steps are selected.
5. Add detergent and softener according to the water level and close the lid.
• If you select the Memory program after turning the washer “On”, the stored settings are
automatically retrieved.
• To change the stored settings, select the Memory program, reconfigure the settings and
then press the Start/Pause button. Then, the changes are stored.
Easy program
If you choose EASY, you will enjoy full access to all of Samsung Washing Machine’s userfriendly
functions at your fingertips. When selecting this program, Air Turbo is selected automatically.
1. Press the Power button to “On”.
2. Press the Program select button four times.
3. Press the Start/Pause button. Water level is selected automatically. Washing rinsing, and
spinning follow. If you want to pause, press the Start/Pause button again. You can change
the Program when paused.
4. Close the lid.
Quick program
The Quick program is good for light or slightly stained laundry.
1. Press the Power button to turn the washer “On”.
2. Press the Program select button.
3. Press the Start/Pause button. The water level is selected automatically.
4. The wash, rinse, and spin cycles follow.
5. To pause a program, press the Start/Pause button again. You can change the program
when it is paused.
6. Close the lid.
Super Clean program
Use this program to achieve the cleanest wash.
This program provides you with the optimum in washing performance through the 5-step super
clean system.
1. Press the Power button to turn the washer “On”.
2. Press the Program select button.
3.
Press the Start/Pause button. The water level is automatically selected.
The water level is selected between Maximum and Mid or at the mid-level between Mid and Mid-low.
4. Close the lid.
Water Saving Program
This program reduces water consumption. Water saving wash, maximum water level, cold & hot
water temperature program is suitable for a normally soiled cotton load.
1. Press the Power button to turn the washer “On”.
2. Press the Program select button.
3. Press the Start/Pause button.
4. The wash, rinse, and spin cycles follow.
5. To pause a program, press the Start/Pause button again. You can change the program
when it is paused.
6. Close the lid.
01 SETTING UP YOUR WASHER