Filter
Top Products
setting up your washer _11
CONTROL PANEL
For more details, see control panel of your washing machine.
POWER BUTTON
Press this button once to turn the power on.
Press it again to turn the power off.
START/PAUSE
BUTTON
Press to pause and restart programs. To change the washing procedure
during an operation, press this button to stop the operation, and press it
again to restart the washer after changing the washing procedure.
PROGRAM
SELECTION BUTTON
Press this button repeatedly to cycle through the washing programs:
[Fuzzy Blanket Wool Memory Easy Quick Super Clean Water Saving]
WASH BUTTON Press this button to only perform a wash cycle or to adjust the wash time.
RINSE BUTTON
Press this button to perform only the rinse cycle or to adjust the amount of
rinse cycles.
SPIN BUTTON
Press this button to only perform a spin cycle or to adjust the spin time.
When only a spin cycle is selected, the spin time will be different from the
total remaining time. This is because the total remaining time includes the
actual spin time, the time for the water to drain and the washer to stop.
FILTER CHECK
When the wash is finished, the warning lamp lights up on the filter check.
When the door is opened, it turns off. (This is not a fault.)When the Magic filter
is clogged, foreign materials may start sticking to the laundry. To ensure a
clean wash, please remove foreign materials from the filter after every wash.
CHILD-LOCK
FUNCTION
This is a device to protect children from being accidentally hurt while playing
with the washer.
• How to start the Child-Lock function:
- Press the “Power” button to go to an initial washing mode.
- By pressing “Start/Pause” button, you start washing and in case Child
Lock function is needed during the laundry
- Press both the “Rinse” and “Spin” buttons at the same times.(for 3 seconds)
(Note: You cannot perform the function without the “Power” button on.
If the
Child Lock function is activated, the
Child Lock icon blinks.)
• To release the function of Child-Lock: In case the “Child-Lock” is
programmed, press both the “Rinse” and “Spin” buttons at the same time.
REMAINING TIME,
DELAY START TIME,
ERROR DISPLAY
The display shows the remaining wash time, the reserved delayed start
time and error messages.
01 SETTING UP YOUR WASHER
7
6
5
4
3
2
1
6
5
4
3
1
2
10
12 11
13
14
8
7
9
8
9