Filter
Top Products
18_Installation & maintenance
Installation & maintenance_19
installation & maintenance
ASSEMBLING THE RAT PROTECTION PANEL
1. It is easier engaging the shutter when
the set is lifted up a little, as shown in the
figure below.
2. Insert the shutter completely through the
engagement hole from the back.
HOW TO CONNECT THE DRAIN HOSE
IN CASE OF PUMP-DRAINED WASHER
• Attach the drain hose to the rear of the washer. Install the
clamp on the drain hose and tighten to prevent leakage of
water.
• Install the drain hose in the position of about 90~100cm
above the ground.
Rear-side
90~100cm
SW75USPIW-02459M_EN(ÀÓ½Ã).indd 18 2009-05-28 ¿ÀÈÄ 4:34:37