Filter
Top Products
10_Setting up your washer
Setting up your washer_11
setting up your washer
CONTROL PANEL
For more details, see control panel of your washing machine.
POWER BUTTON
Press this button once to operate.
Press it again to turn the power off.
MEMORY BUTTON
Press this button once to operate.
Manually select the functions to use. (Course, Air Turbo, Rinse count)
Your choices are automatically saved when pressing the
Start/Hold button.
To use a memorized course, press the
Memory button and then press the
Start/Hold button.
- The memorized functions will be displayed on the panel.
Insert some detergent and rinse detergent in proportion to the water level
and close the cover.
This function allows frequently used functions to be memorized so that they
can be easily used when needed.
START/HOLD
BUTTON
Use to pause and restart the operation.
To change the washing procedure during an operation,
press this button to stop, and again to restart after changing the procedure.
COURSE SELECT
BUTTON
Each time the button is pressed, the washing course changes;
Fuzzy Blanket Delicate Clean Tub Quick Econo Super
clean Easy
DELAY START
BUTTON
Press this button to finish the wash at a specified time.
Turn off your washing machine to cancel a reserved delay start.
You can set the delay start time from between 3 to 18 hours.
FILTER CHECK
When the wash is finished, the warning lamp lights up on the filter check
.
When the door is opened, it turns off. (This is not a fault.)
When the Magic filter is clogged, foreign materials may start sticking to the
laundry. To ensure a clean wash, please remove foreign materials from the
filter after every wash.
SPIN BUTTON
Press this button to perform a spin cycle only or to adjust the spin time.
You can set the spin time from between 1 to 9 minutes.
When only a spin is selected, the spin time will be different from the total
remaining time. This is because the total remaining time includes the actual
spin time and the times for water draining and stopping.
RINSE BUTTON
Press this button to perform a rinse only or to adjust the rinse count.
You can set the rinse count up to five times.
7
5
4
3
2
6
1
11
12
13
14
10
8
9
7
6
5
4
3
2
1
8
SW50USPIW-02447K_EN(ÀÓ½Ã).indd 10 2009-05-29 ¿ÀÈÄ 3:26:59